我从中国买了一台最便宜的数控车床 -值得冒险吗？

@Pathos15:
I have this exact machine, only with all options. We ran a batch of 200 stepped pins one day out of 4140, and it held .0003" the entire time. We had the same issue with offsets. Some of these machines left the factory with wrong parameters installed. After a few emails, they sent us the proper parameters along with a video showing how to upload them, and it's been spot on ever since!

我拥有这台完全相同的机器，只不过是所有选项都包括在内。我们曾用4140材质生产了一批200个台阶销钉，它整整一天都保持在0.0003精度。
我们也遇到过偏移的问题。一些机器出厂时安装了错误的参数。
经过几封电子邮件，他们向我们发送了正确的参数和上传视频教程，从此机器一直运转完美！

@prestigemanufacturingky:
That’s awesome! I need those lol

太棒了！我也需要这些，哈哈

@darkwinter7395:
Be sure to peel off that clear sticker on the LCD - eventually the adhesive will dry out and the sticker will shrivel up making a mess of the display. If you want to protect the LCD against shop swarf cut a piece of acrylic or polycarbonate and stick it to the bezel with a thin strip of double-sided tape (eventually you'll have to replace the plastic and tape, but the underlying LCD should still be in good condition).

确保撕下LCD上的透明贴纸——最终，粘胶会干掉，贴纸会皱起来，弄乱显示屏。如果你想保护LCD不受车间切屑的影响，可以剪一块亚克力或聚碳酸酯，并用一条薄的双面胶带将它粘在框架上（最后你可能需要更换塑料和胶带，但底下的LCD应该保持良好状态）。

@prestigemanufacturingky:
Good to know, I appreciate the advice!

知道了，谢谢你的建议！

@GeffenAvraham:
These Chinese machines are not bad. I own a Chinese purpose-built 5-axis I got for about $30K before tariffs. Had to learn all the quirks with the custom controller, but the company is very supportive and the hardware is great.

这些中国制造的机器不差。我拥有一台中国定制的五轴联动机床，花了大约3万美元（关税前）。
我一开始不得不学习定制控制器的各种小问题，但这家公司非常支持，硬件也很棒。

@prestigemanufacturingky:
That’s awesome! I’ve had pretty good luck with the companies in China supporting the products that I purchased

太棒了！我在中国购买的产品得到了公司的很大支持。

@medliningmachineworks8290:
What was the name of the company you worked with? I love to have an entry level 5 axis Vertical machining center.

你和哪家公司合作的？我想拥有一台入门级的五轴立式加工中心。

@GeffenAvraham:
@medliningmachineworks8290 I used a Sieg W250. Sieg is the company that makes the ubiquitous mini mills, but they also make large CNCs.
Good machine, good hardware, software is quirky. But it works well with F360 after some playing.
It's for sale if you want it, sadly we had to move out of our warehouse and don't have much room to store it.

我使用的是Sieg W250。Sieg是制造普通用迷你铣床的公司，但他们也制造大型CNC机床。
这是一台不错的机器，硬件很好，软件有些怪异。但经过一些调试，它和F360配合得很好。
如果你需要的话，它现在在出售，可惜我们不得不把它搬出仓库，没有多少地方存放它。

译注：Sieg是上海西格机床

@asfdsdfasdf:
What model do you have? I’d be interested in this down the road

你有哪个型号？我以后可能会对这个感兴趣。

@GeffenAvraham:
@asfdsdfasdf A Sieg W250. Very solid machine once you deal with the quirky controls and weird software.
Sadly I'm moving out of my facility so I have to sell it, it's available if you want.

一台Sieg W250。处理好那些怪异的控制和软件后，它是一台非常坚固的机器。
可惜我正在搬离工厂，所以必须出售它，如果你有兴趣可以联系我。

@Biocathand:
@GeffenAvraham ShangHai Sieg? good brand

上海Sieg？不错的品牌

@HVWeight:
WHAT!!!!! $4500

什么！居然只要4500美元！

@rahul_wuchan:
@prestigemanufacturingkycnc on a steel for 4.5k....thats treasure

4500美元买一台钢铁机床...这真是宝贝

@unhinged-menagerie:
$4500????? That's incredible. You couldn't buy the parts for $4500 here, forget a entire assembled working machine. That's incredible. That's what you would pay for a machine that's being parted out. It would be very difficult to use without a turret toolchanger, but that's still an incredible deal. You make awesome videos. Keep up the good work.

4500美元？？？这太不可思议了。在这里，4500美元连零部件都买不到，更别提一整套组装完好的可运行设备了。这简直是难以置信的价格。
通常这个价钱只能买到一台正在被拆解卖零件的机床。
没有转塔式刀库，使用起来会很麻烦，但这仍然是一个惊人的交易。你制作的视频很棒，请继续保持出色的工作。

@bagasn1945:
@prestigemanufacturingkyyou also can buy $4,000 car. Wuling mini ev in China .

你也可以买一辆4000美元的车。在中国可以买一辆五菱迷你电动车

@susinluo:
@bagasn1945u can't.....wuling mini EV is about $6300

你不能.....五菱迷你电动车大约6300美元

@bagasn1945:
@susinluoBase version 2 doors .

基本款两门的可以。

@susinluo:
@bagasn1945You're referring to the price after subsidies. To get this price, you need to scrap a car from before 2012 and obtain legal documentation.

你说的是补贴后的价格。要获得这个价格，你需要报废一辆2012年之前的车，并获得合法证明。

@MrMultizaf:
Is not fusion360 fault ,First You need to set g54( position of stock) then u need to go to tool table and set offsets for toll that u will be use in program. feed and speed you look to the back on the box of inserts and start with those numbers.

进给速度和转速你可以参考刀具盒背面的参数，从这些数值开始设置。

@lancewood1410:
Meanwhile our government is trying their best to tariff the heck out of it's own people LOL.

与此同时，我们的政府正在尽最大努力对自己的人民加税，哈哈。

@donotwantahandle1111:
I think it's great how you get these machines that are affordable (when compared) and then test them for people like me who have wondered about them (versus a standard lathe) but haven't used them. I look forward to see what you can make with it!

我觉得很棒的是，你能够得到这些价格实惠的机器（与标准车床相比），然后为像我这样的人测试它们，虽然我们曾对它们感兴趣（但还没有使用过）。我期待看到你用它能做出什么作品！

@spikeypineapple552:
That price is nuts. You need about 1000rpm, 0.004in/rev feed for your finish pass.

这个价格真疯狂。你的精加工速度需要大约1000转/分钟，进给量是0.004英寸/转。

@jackalvee1927:
Just wanted to say thanks for your reviews! Watching you go through these cheap Chinese CNC lathes actually makes me feel like I can start my own backyard machine shop someday without breaking the bank. You’ve definitely become my first point of contact for advice when I finally have the funds—really appreciate the guidance and encouragement

只是想说谢谢你的评测！看你评测这些便宜的中国CNC车床，实际上让我觉得我有朝一日也能开始自己的家庭车间而不会破产。
当我终于有资金时，你肯定会成为我第一个寻求建议的对象——真的非常感激你的指导和鼓励。

@ghh-nt7jp:
in China ，there are many family CNC hub。。。我是中国人，我知道很多中国家庭作坊就是有一台或者两台CNC设备用于赚生活费，我推荐北京精雕的产品，我体验过，很好

在中国，有很多家庭型CNC工作坊。。。我是中国人，我知道很多中国家庭作坊有一台或两台CNC设备用来赚生活费，我推荐北京精雕的产品，我体验过，很好。

@Christanbetz:
The reason your finish is so bad is your feed rate to rpm (IPR) is way off especially with using carbide inserts as well. Running aluminum and steels with a VNMG insert you want a far higher rpm like 2000-4000 depending on stock diameter and material. Focusing on keeping your IPR to around .01 ish, and a good finish IPR around .005. The reason your insert chipped was such a slow rpm with that intense feed rate. Carbide likes to go fast and smooth not slow and rough due to how brittle it is vs something like HSS

你的表面处理这么差的原因是你的进给速度和转速比率（IPR）严重偏离，尤其是在使用硬质合金刀片时。
用VNMG刀片加工铝材和钢材时，你需要更高的转速，如2000-4000转/分钟，具体取决于工件直径和材料。
要把IPR保持在0.01左右，好的表面处理的IPR大概在0.005。刀片崩裂的原因是转速太低，而进给量又过高。
硬质合金刀片喜欢高转速和光滑的切削，而不是低速和粗糙的切削，因为硬质合金比高速钢（HSS）更脆。

@samuelt321:
The cosmoline is strong on this one

这台机器上的防锈油很厚

@prestigemanufacturingky
for real

真的

@medliningmachineworks8290
You might want to take a look and make sure that it has a hard machine stop for the Z axis. I have a similar machine and it did not have one and I was running a program that had been ran hundreds of times and not been edited at all that day and all of a sudden the tool crashed into the chuck jaws breaking the tool changer and causing a lot of damage. After that, I went and found a spot under the ways on the bed and drilled and tapped holes and put up an aluminum crushed block that would prevent the tool from ever going to into the chuck jaws again.

你可能需要检查一下，确保Z轴有硬停止。我有一台类似的机器，它没有这个功能，当时我运行的程序已经执行了几百次，今天并没有编辑过，结果突然工具撞上了卡盘，导致工具更换器损坏，造成了大量损坏。
之后，我在床身的滑轨下找到了一个位置，钻孔并攻螺纹，放置了一个铝制压块，防止工具再进入卡盘夹爪。

@prestigemanufacturingky
Thanks for the heads-up and the advice, I'll definitely check that out!

感谢提醒和建议，我一定会检查的！

@noodles7011
why couldnt you set a Z axis limit in the parameters?

为什么你不能在参数中设置Z轴限制呢？

@dodienko
That is pretty much pointless as if you use a longer tool for boring for example it would still crash in to the chuck. you made a mistake somewhere, maybe a wrong offset in Z, program didn't change but your zero could be changed from previous program.

那几乎是没有意义的，因为如果你使用更长的工具进行钻孔，它仍然会撞上卡盘。你可能在哪儿犯了个错误，可能是Z轴偏移错误，程序没有更改，但你的零点可能从前一个程序中改变了。

@medliningmachineworks8290
@dodienko the point is not to keep from destroying tools it’s from to keep from running the tool changer into the chuck. In my situation, the tool changer was broken off the saddle when it ran into the Chuck spinning at 3000 RPM.

关键不是防止摧毁工具，而是防止工具更换器撞到卡盘。在我的情况下，工具更换器在撞到转速3000转的卡盘时被从鞍座上撞断了。

@rene_ger
I have machines which cost more than 1 million € and none has a "hard stop" for that purpose - i never in my whole work life saw any machine having this - because tools have different length and this would only work with one specific tool length. Not to mention boring bars and stuff.

我有些机器价格超过100万欧元，但没有一台配备“硬停止”功能——我在整个职业生涯中从未见过有这种功能的机器——因为工具长度不同，这个功能只能针对某一特定的工具长度起作用，更别提钻杆之类的东西了。

@seimela
@prestigemanufacturingkydid you home the machine?

你有没有进行机器归零？

@Jutilaje
@rene_geryou just set the block to the point where the tool changer block is almost hitting the chuck. You're not gonna have any tools that are gonna go "deeper" than that, since your tool holder would be hitting the chuck. Obviously that doesn't work on different styles of machines, but for this one, it does.

你只需将块设置到工具更换器块几乎撞上卡盘的位置。你不会有任何工具能“更深”地进入，因为你的刀架会撞到卡盘。显然，这在不同风格的机器上不起作用，但在这台机器上是有效的。

@kisspeteristvan
That's bullshit brother. Jaw lenghts change every day. There is literally nothing you can do to avoid carnage.  And often these extra extra safety nets will be disabled by YOU, because you have to.

那是胡说八道，兄弟。夹爪长度每天都会变化。你几乎无法做任何事来避免灾难。而且这些额外的安全网通常会被你禁用，因为你必须这么做。

@Jutilaje
@kisspeteristvanbro. Look at the tool changer on this machine lol. Please explain how "jaw length" or whatever other length is going to change on this machine in the Z direction.
Will you still be able to crash a tool into the machine? Sure. But you can absolutely set a hard stop that will prevent the tool changer from crashing into the machine. Which is what OP is talking about - having an OD tool in the tool changer and the machine driving the tool changer into the spinning chuck, destroying the tool changer vs just destroying a tool.

看看这台机器上的工具更换器，哈哈。请解释一下，如何在这台机器上，Z轴方向的“夹爪长度”或其他长度会发生变化。
你仍然能让工具撞到机器上吗？当然能。但你完全可以设置一个硬停止，防止工具更换器撞到机器上。
这正是原文作者在说的——工具更换器里有一个外径工具，机器将工具更换器推入旋转的卡盘中，摧毁工具更换器，而不是只摧毁工具。

@prestigemanufacturingky
No I don’t. I doesn’t have that feature

不，我没有。它没有那个功能。

@donbotting5700
Great video! About time we see a Chinese machine review! Keep up the good work!

很棒的视频！终于看到一台中国机器的评测了！继续保持优秀的工作！

@Gazman110
Great looking lathe. Really enjoyed the overview

这台车床看起来很棒。我真的很喜欢这次概述

@funone8716
Very cool to see a review of the China machine and GSK control. Need to set control to Diameter mode, then take a test cut, measure, then set the X axis to the diameter you measured. It's hard to find much info on the GSK controls, glad to see this one here.

看到对中国机器和GSK控制的评测很酷。需要将控制器设置为直径模式，然后进行测试切割，测量后将X轴设置为你测量的直径。
很难找到很多关于GSK控制的信息，很高兴能看到这个评测。

@Vytor01
That spindle should be doing 2500-3500 rpm.

那个主轴应该在2500-3500转之间。

@Thatslugtho
Yeah I was a bit worried about that cutting speed

是的，我有点担心那个切割速度

@martinmaurach300
Hey, I'm happy you removed the chuck key before exploring the M functions...

嘿，我很高兴你在探索M函数之前移除了卡盘扳手...

@prestigemanufacturingky
Good eye!

好眼力！

@maxwellentertainment914
I have 2 weeks off of working on machines for the Holidays and what do I do? Looking at random Chinese lathes...pretty neat though

我有两周假期没做机器相关的工作，我在做什么呢？看一些随机的中国车床...不过还挺有意思的

@sevytech
Very good deal! That machine is in neat condition! Thanks for the video sir

非常划算！那台机器状况很好！感谢您分享的视频，先生

@agust8474
its an ideal machine for making buttplugs i guess

我猜你可以用这台机器做理想的肛塞

@prestigemanufacturingky
I guess it could be used for that if you wanted to.

如果你想的话，我猜它也可以用来做那个。

@epilotdk:
Brass og stainless steel for you Sir?

黄铜和不锈钢，您要吗，先生？

@HeartlessTinMan:
And here I thought he was making a dong on his Shandong lathe and I was wondering why it was so short.

我还以为他在他的山东车床上做一个东西，我在想为什么它这么短。

@aleksz11567:
Thank you very much for your recognition of Chinese machines. If possible, please feel free to learn more about BORUI CNC machines.

非常感谢您对中国机器的认可。如果可能的话，请随时了解更多关于博瑞CNC机床的信息。

@prestigemanufacturingky:
Glad I could share my experience!

很高兴我能分享我的经验！

@depressive.fatalist:
Interesting CNC. However, I’ve heard that many cutting plates need far more than 1 500 RPM so that the chips break into small chips rather than winding up into a ribbon.

有趣的CNC。不过，我听说许多切割板需要远高于1500转/分钟，这样切屑才会破碎成小屑，而不是卷成带状。

@tomcat7661:
You need to sort out your speeds, feeds and tip sextion for the material being cut, plus tip radius. Also incorporate constant cutting speed usually a G96, plus coolant would be handy, but I guess if you're filming thats a bit tricky.

你需要整理好切割材料的速度、进给量和刀具选择，还要考虑刀具半径。还要使用恒定切削速度，通常是G96，使用冷却液也会更方便，不过如果你在拍摄时，这可能有点麻烦。

@prestigemanufacturingky:
Thanks for the advice. I did try constant speed but for some reason this machine didn’t want to accept it so I have to figure that out. I tried G 96 and G 97.

谢谢建议。我确实尝试过恒定速度，但由于某些原因，这台机器不接受，所以我得弄清楚为什么。我尝试了G96和G97。

@wk7060:
Nice lathe, that would work good in my garage.

不错的车床，放在我的车库里会很好用。

@prestigemanufacturingky:
Thank you. It’s for sale lol

谢谢。它现在出售，哈哈。

@ICGUNS:
Really like your videos! Do you have a website for your machine sales?

真的很喜欢你的视频！你有卖机器的网站吗？

@prestigemanufacturingky:
Thanks. I just have my support website

谢谢。我只有我的支持网站。

@Elliot00000:
its got the door that closes!...sold!

它有可以关上的门！...卖掉！

@noneofyourbusiness4294:
Honestly, I'm currently looking for some stuff, and I'm not gonna lie, I tend to look at stuff with doors first. I'm not one to fall for shitty advertising. Doors on the other hand..

老实说，我现在在找一些东西，说实话，我总是先看有门的东西。我不是那种会轻易相信糟糕广告的人。可是，门嘛……

@joelmason6818:
Can you provide info on the shop you have? You might have a video on it, not sure. I need a smaller version of it.

你能提供一下你店铺的信息吗？你可能有相关的视频，不确定。我需要它的一个更小版本。

@ramonching7772
You got a winner. And with the machine you have a chance winning. Low equipment cost is key.

你成功了。有了这台机器，你有机会获胜。低设备成本是关键。

@medliningmachineworks8290
One other thing concerning that tool changer when it changes tools it rises up just a little bit so that he can spin and then locks back down before it starts turning the part you wanna watch to make sure shavings don’t get in that area it doesn’t look like they’ll get there, but they do. We used my Lathe with the same tool changer and about every 20,000 parts machining aluminum I had to change out the tool changer due to wear. It would get to the point where it would flex under heavy cuts, and wouldn’t hold tolerance

关于那个换刀器，还有一点需要注意，当换刀时，它会稍微上升一点，以便旋转，然后在开始加工工件之前锁定下来。
你需要观察，确保切屑不会进入那个区域，看起来它们不会进去，但它们确实会。我们用的是我同款的车床，每加工20,000个铝制零件，我就不得不更换一次换刀器，因为它磨损了。它会到达一个弯曲的程度，无法承受大切削力，精度也无法保持。

@bobmarwood4232
Most interesting vid, thank you. I'm not familiar with this control. On the Fanuc control to set the X offset I would manually take a chip, measure the diameter, go the the offset page enter the diameter you just cut (without moving the tool in X) hit measure button and that is your offset. The 1200 rpm seems way too slow to me when facing to center. Seems like a surprising decent machine considering the unbelievably low price. Again, I enjoy your vids very much and appreciate the effort you put into them.

最有趣的视频，谢谢。我不熟悉这个控制系统。在Fanuc控制系统下，要设置X偏移，我会手动取一片切屑，测量直径，进入偏移页面，输入你刚刚切的直径（不移动工具在X方向），按下测量按钮，这就是你的偏移。
1200转速对于我来说似乎太慢了。考虑到令人难以置信的低价，这台机器看起来很不错。再次感谢你的视频，我非常喜欢，也很感激你投入的努力。

@JoelBergmark
Great price and great product! Exporting deflation is the shit!

价格超值，产品也很棒！（中国）出口通缩真是太牛了！

@fiteboss
I would have bought a used (but not used up) Japanese lathe with a turret and Fanuc control. They are out there, but you have to keep an eye out and be ready to jump when they come available.

我会买一台二手的（但不是已经用坏的）日本车床，带有刀塔和Fanuc控制。它们是有的，但你必须留意，并且准备好在它们出现时立即行动。

@prestigemanuf
@Narwaro
Well, a few years ago I bought a second chuck for my lathe, a pull tube hydraulically actuated collet chuck for 173e collets, about 42mm max. The chuck was 8 grand and the 40 collets were about another 4 grand.
It was a Japanese machine tool, and damn it, it broke down very quickly.

几年前，我为我的车床买了第二个卡盘，是一个液压驱动的拉管夹头，适用于173e夹头，最大直径约42mm。卡盘花了8千，40个夹头花了约4千。
那是一台日本机床，该死的，结果它很快就坏了

@prestigemanufacturingky
It’s crazy how cheap it is!

它便宜得令人难以置信！

@thieltech1
Theres gotta be a offset to set tool to the center line of chuck. Also the spindle should be running at 2500 to 3000rpm like others said. Id image for a good finish passcut 15 to 20 ipm Very cool you bought this and showed it. Love all your machine retro fits. People really like seeing that kinda stuff . Merry Christmas

肯定有一个偏移设置，用来将工具设置到卡盘的中心线。另外，主轴应该像其他人说的那样运行在2500到3000转之间。我猜对于一个好的精加工，进给率是15到20英寸每分钟。
你买下这台机器并展示它真酷。我很喜欢你所有的机器改装。人们真的喜欢看到这些东西。圣诞快乐！

@GameBacardi:
I wondering, could control handle code G96 with cutting speed S120 for example. Also code G50 S2500 for limit max spindle speed.
*I'm talking in metric system tough.
Also also to handle units, G20 for inch, G21 for mm

我在想，控制系统能否处理G96代码，例如切削速度S120。同时，使用G50 S2500来限制主轴的最大速度。
*我使用的是公制系统。
另外，处理单位时，G20表示英寸，G21表示毫米。

@undaware:
Like most of the machines of this caliber it sounds a little, pick your term, hollow or loose or flexible. Might be a pain chasing numbers and finishes but will do fine for certain work.

像大多数同类机器一样，它的声音有些……怎么说呢，可以说是空洞、松散或有弹性。追求精度和表面处理可能会有点麻烦，但对于某些工作来说，它是完全能够胜任的。

@aintdatsnipes177:
Nice garage lathe tariff almost doubles the cost though, not diggin the gold plating.

不错的车库车床，不过之前的关税几乎把成本翻倍了，我不太喜欢金色镀层。

@Screwdriver-:
They even wrote Chinese characters on all the buttons.
Remember Google Translate camera mode can always translate what you see to English.

他们居然在所有的按钮上都写中文
记得Google翻译的相机模式可以将你看到的内容翻译成英语。

@Donny86:
Yeh youre feeding way too fast for your rpm. I would put a clock indicator on the machine and move say 1mm and see what it actually moves to ensure its dialed in properly. There will be parameters for altering it. Great little machine tho for the cost

是的，你的进给速度太快了，和转速不匹配。我会在机器上装个表计，移动1毫米，看看实际移动多少，确保它调校正确。会有参数可以调整。尽管如此，这台机器的性价比非常高。

@yongma-df4om:
They should have provided you with an English control panel; it should have been set to English mode before leaving the factory.

他们应该为你提供一个英文控制面板；在离开工厂之前应该已经设置为英文模式。

@prestigemanufacturingky:
I agree!I'm willing to pay an extra $500.

我同意！我愿意多付500美元

@Steelcrafted:
That's a great deal, if it sounds like for some reason your machine is reading diameter instead of radius, or vice versa..... If something was drastically off, it would have crashed right into the part, but being that it basically took about half of whatever you had programmed, I think you're cam software is outputting diameter, and your machine is reading it as depth of cut on the radius. That would be my guess.

这是一个很棒的交易，如果听起来你的机器出于某种原因读取的是直径而不是半径，或者反过来……如果有严重的偏差，机器会直接撞到工件上，但实际上它大概只加工了你程序中一半的内容，我猜测你的CAM软件输出的是直径，而机器将其读取为半径上的切削深度。

@Steelcrafted:
@prestigemanufacturingkyfrom Google "In CNC lathe G-code, the main difference between radius and diameter programming is how the X-axis values are interpreted: Diameter mode (common) uses X for the part's full diameter, while Radius mode uses X for the distance from the centerline (half the diameter). You switch between these modes using specific G-codes (like G190 for radius, G191 for diameter on some machines) or via machine configuration"

根据Google的解释：“在CNC车床G代码中，半径和直径编程的主要区别在于X轴值的解释方式：直径模式（常见）使用X表示工件的完整直径，而半径模式使用X表示从中心线到工件的距离（即半径）。
你可以通过特定的G代码（比如G190用于半径，G191用于直径，某些机器上使用这些代码）或机器配置来切换这些模式。”

@thanhdiep59:
Your inserts should be in the recycling bin.

你的刀片应该扔进垃圾桶

@Terryo6781:
Hey was the shipping for the lathe to your door, loading dock? How did that work?

嘿，车床的运输是直接到你家门口还是到装卸码头？是怎么操作的？

@prestigemanufacturingky:
Yes to my door. I have a forklift

是的，直接到我家门口。我有叉车。

@yamatuzi:
Great video thanks for sharing info.
Could you tell me who your import agent is?

很棒的视频，谢谢分享信息。
你能告诉我你的进口代理商是谁吗？

@lucientjinasjoe1578:
It's the cutting tool that can cut hard steel items, less the latching machine

它是能够切割硬钢物品的切削工具，不包括卡紧机。

@prestigemanufacturingky:
Interesting!

有意思！

@hdxyhdhdhhdhdhehd6305:
Before tariffs, this would be like $3k
It's currently at 4500, but it still beats all Japanese and German products. Therefore, Trump's tariffs are essentially robbing ourselves.

在征收关税之前，这台机器大约是3千美元。
现在是4500
但是它依然能击败所有的日本，德国产品
所以特朗普的关税根本就是在抢劫我们自己

@prestigemanufacturingky:
Yup

是的

@arbjful:
That’s a good machine, very cheap too

这是一台不错的机器，而且非常便宜。

@prestigemanufacturingky:
Definitely

绝对是

@wk7060:
It is very limited on part size, but nice lathe.

它在工件尺寸上有很大限制，但车床本身不错。

@prestigemanufacturingky:
I think so too

我也这么认为

@6884nfghfjk:
I know from my experience with a Hitachi CNC lathe that offsets are wear offsets which you enter small amounts of offset cut the part a zero offset and then move the offset in or out as needed to bring in your dimension.

根据我使用日立CNC车床的经验，偏移量是磨损偏移量，你输入小量的偏移量，切割零偏移量的工件，然后根据需要调整偏移量，直到达到所需尺寸。

@prestigemanufacturingky
These machine tools from China can already perfectly replace products from Japan and Germany.

中国这些机床已经可以完美替代日本和德国产品

@mgnbukint6502
Other controls have Geometry offsets as well as Wear. Geometry offsets are an extra cost option on Fanuc controls - you can use the machine without them, but it is faster and more convenient to pay for the extra function.

其他控制系统也有几何偏移和磨损补偿功能。几何偏移是Fanuc控制系统的一个额外收费选项——你可以不使用它，但支付额外费用开启这个功能会更快更方便。

@rogerfroud300
It's like the Chinese manual lathe that I've got. The quality and finish on the parts that don't matter is truly dire, but the Metal only experiences how rigidly it's being worked, and how accurately the tools move. Everything else is fluff and doesn't matter if all you want to do is make parts.

这家伙像我拥有的中国手动车床。那些不重要的部件的质量和表面处理都非常差劲，但金属只感受到它被加工的刚性，以及工具移动的精确度。
其他的都是无关紧要的，只要你想做零件的话。

@prestigemanufacturingky
Definitely
If the purchase price is 30% lower I can accept that he doesn't even need to paint it.

绝对是
如果购置价格低30%  我能接受他甚至不喷涂油漆

@jacehampton5552
are there tool holders that would allow you to drill with that lathe?

有没有工具夹具可以让你用这台车床钻孔？

@prestigemanufacturingky
Yes, you can drill with it also

是的，你也可以用它来钻孔

@dilipgauda9090
Do you need programming support? For cnc lathe and cnc mill, 4 and 5 axis.... please let me know. Thanks

你需要编程支持吗？对于CNC车床和CNC铣床，4轴和5轴的支持...请告诉我。谢谢

@LivengoodScott
Oh the joy of scraping cosmoline then scrubbing it off with kerosene. Do this before you put good coolant in there. If you wanted to put it into OUR shop, the guys would only use it if it had a FANUC control. IMHO. I enjoyed the video.

哦，刮掉防锈油后再用煤油擦干净的乐趣。在放入好的冷却液之前做这个。如果你想把它放到我们车间，伙计们只有在它配备FANUC控制时才会使用。仅仅是我个人的看法。视频我很喜欢。

@jondavidmcnabb
first thing i do is measurement tests. Using gauges and calibrated tools; i always want to know my “machine” tolerances. I don’t care if a machine is rough as long as I know how rough. Each of my tools has a purpose and a tolerance. Most Chinese stuff is a reasonable deal as long as you know the downside. They usually tell you that you’re buying a Ferrari but let’s be honest as long as it is a Vette I am ok with it. This is why Lincoln and Miller are having such a rough time lately. We all know that shits made in China and assembled or shipped here. If there is a Chinese equivalent that’s half price with 90% of the features then we are winning.

我做的第一件事就是测量测试。使用量具和校准工具；我总是想知道我的“机器”公差。我不在乎机器粗糙，只要我知道它有多粗糙。我的每个工具都有其用途和公差。
只要你知道劣势所在，大多数中国制造的东西都算是一个合理的交易。

通常他们会告诉你你买的是一辆法拉利，但让我们说实话，只要它最终是辆雪佛兰，我就可以接受。这就是为什么林肯和米勒最近处境如此艰难。
我们都知道那些东西是中国制造的，后来在这里组装或运输。如果有一个中国同类产品，价格是它的一半，功能有90%一样，那我们就赢麻了。

@prestigemanufacturingky
Knowing your machine's limits is definitely key.

了解机器的极限绝对是关键。

@medliningmachineworks8290
Does it have a conversational portion of the controller? I know it’s a GSK but sometimes they do have models that have a nice conversational or I used it to figure out how to do a tool where offsets and tool calibration.

它的控制器有对话功能部分吗？我知道它是GSK控制系统，但有时他们也有一些型号有不错的对话功能，我曾经使用它来解决如何进行偏移和工具校准的问题。

@krockpotbroccoli65
That's still steep for what I'd be using a machine for, even if it's quite affordable compared to it's higher end competitors. If I ever get machines they'll be antique manual ones in all likelihood, although you have shown that old CNC stuff can be had for cheap and brought back into service, so there's that too...

对于我来说，这个价格仍然偏高，即使和高端竞争对手相比它是相当实惠的。如果我将来买机器，它们很可能是古董手动车床，虽然你展示了旧的CNC设备也可以以低价购买并重新投入使用，所以也有这个选择……

@natcollymore84
Thats a fantastic price

这是个超值的价格